The Easee Home is an intelligent charging station that adapts to all electric vehicles, power voltages and mains. Manufactured in Norway, The Charging Robot is compact and lightweight, approximately 69% smaller than other solutions and weighing just 1.5kg.
The features within the Easee Home make this a truly dynamic and smart solution for home charging. The charging robot will automatically detect whether the car supports 3-phase or not. There is no need to think about technical specifications, the Easee Home always adapts to the car's needs and delivers the maximum power available at your home.
Fully dynamic charging power from 1.4 - 22kW on Single and 3 Phase Charging (NOTE: 3 Phase supply required to enable up to 22kW charging) with the capability of load balancing up to 3 units per supply without additional infrastructure (wireless). The features also include Automatic queuing system, Wifi and 4G (E-Sim) integrated in every charging robot with FREE subscription included for life.
The Easee Home also has an in-built Type B RCD for maximum protection and Integrated RFID reader (NFC / ISO 14443 and MiFare Classic).
With the Easee app it is possible to control and plan when your car is charging. You can see live values for the current charge session and get an overview of your consumption. If you want to avoid finding the charging cable every time you charge the car, you can easily lock the cable permanently in the Charging Robot through the app.
You get full control over who can charge and when they can charge. We update the app periodically to make your Charging Robot even smarter.
For an installation that requires a Charging Lead with the Easee Home, a Type 2 Cable is available separately for Permanent locking of the cable. See Order Code 65-3641.
The Easee Home is approved under the OZEV Electric Vehicle Home Charge Scheme after 1st July 2019 with the requirement for Charging Stations to be SMART enabled:- https://www.gov.uk/government/news/government-funded-electric-car-chargepoints-to-be-smart-by-july-2019.
For information about government grant schemes available for the installation of EV charging stations click here.
Product Description: | Easee Home Black Robot 1PH & 3PH up to 22kW |
Replenishh Order Code: | 65-3625 |
Supplier Code: | 10103 |
Product Type | AC Electric Vehicle Charging Station |
Dimensions (L x W x D) | 256 x 193 x 106mm |
Weight | 1.5kg |
Connector Type | Socket |
Cable length | Optional Extra |
Warranty | 36 Months |
Mounting Options | Wall / Floor (Opt) |
Mains Incoming Supply | Single Phase & Three Phase |
Maximum current (Amps) | 32A |
Charging power | 1.4kW to 22kW |
Maximum Input Cable Size | 5 Core x 10mm² |
Earth-Neutral Fault Detection | No |
DC Leakage protection Included | Yes |
RCCB/RCBO Included | Yes, Type B RCCB |
Nominal frequency | 50Hz / 60Hz |
Degree of protection (IP) | IP54 |
Impact Strength (IK) | IK10 |
Operating temperature | - 30°C to 40°C |
Number of Output Connectors | 1 |
EVHS OZEV Approved | Yes |
WCS OZEV Approved | No |
Connectivity | Wifi | 4G/GPRS | RFID | NFC |
User Identification | Plug & Play | Easee App | RFID | NFC |
User Interface | Easee App | Easee Ops |
Charger Status Information | LED Strip | Easee App | Easee Ops |
Static Load Management | Yes - up to 3 units per fuse |
Dynamic Load Management | Optional |
OCPP | Yes - 1.6 |
Energy Meter | Yes, not MID Approved |
Solar Integration | No |
Access Control | Plug & Play, Easee App, RFID, NFC |
---|---|
Mounting Type | Wall / post |
No. of output connectors | 1 |
Output Connection | Socket |
Output Connector Type | T2 socket |
Output Current | 32A |
Output Power | 3.7 / 7.2 / 11/ 22kW |
OZEV Homecharge Scheme | Yes |
OZEV Workplace Scheme | No |
Protective Earth and Neutral (PEN) Fault Detection | No |
Supply Voltage | 230, 415V |
Available for re-reeling