| Qty | Ex VAT |
Pack Price
Per 25 Units |
|---|---|---|
| 25+ | £5.75 | £143.75 |
Quadruple-deck rail-mounted terminal block from WAGO, suitable for electric motor wiring.
This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.
| Accessory Type | Marker |
|---|---|
| Used With | PT 10 |
| Category | Rail-Mount Terminal Blocks |
| Colour | Grey |
| Connectable conductor materials | Copper |
| Connection | Push-in CAGE CLAMP® |
| Continuous Use Temperature | -60 … +105 °C |
| Current Rating | 20A |
| Fine-stranded conductor max. AWG | 12 AWG |
| Fine-stranded conductor max. mm² | 4mm² |
| Fine-stranded conductor min. AWG | 12 AWG |
| Fine-stranded conductor min. mm² | 0.25mm² |
| Flammability class according to UL94 | V0 |
| Height | 103.5mm |
| Height inch | 4.075inches |
| Maximum Wire Size AWG | 12 |
| No. of Ways | 7 |
| Nominal cross-section mm² | 2.5mm² |
| Number of pins | 7 |
| Product Main Function | Quadruple-deck terminal block;Ground terminal block;Through terminal block |
| Rated current | 20 A |
| Single-stranded conductor max. AWG | 12 AWG |
| Single-stranded conductor max. mm² | 4mm² |
| Single-stranded conductor min. AWG | 22 AWG |
| Single-stranded conductor min. mm² | 0.25mm² |
| Stripping length of 1 mm | 10mm |
| Stripping length up to 1 mm | 12mm |
| Termination | Push-in Cage clamp |
| Total number of pins | 7 |
| Type | Terminal Block, Quad Deck |
| Type of operation | Operating tool |
| Unit Weight | KGM |
| Voltage Rating | 800V |
| Weight | 25.965g |
| Width | 5.2mm |
| Width inch | 0.205inches |
| Width mm | 5.2mm |
| Wire Gauge (AWG) | 22 to 12AWG |
| Wiring Type | Front-entry wiring |
