| Qty | Was | Ex VAT |
|---|---|---|
| 1+ | £452.85 | £286.36 |
The Fluke 170 series sets the benchmark for general purpose multimeters. They set the standard with a combination of precision, features, ease-of-use, safety and reliability. It offers true rms AC voltage and current readings, 6000-count resolution, min-max-average recording, as well as frequency and capacitance ranges. Despite all these and many other useful features, the 170 series remains easy to use.
The ergonomic case with integrated holster protects the meter in rough and tough environments. The case does not have to be opened to change the battery, as access to the battery is via an easy to open battery door. Similarly, calibration is carried out through the front panel. Smoothing mode allows filtering of rapidly changing inputs, and manual and auto ranging make this an extremely versatile multimeter.
| AC Voltage Max | 1000V |
|---|---|
| DC Voltage Max | 1000V |
| Automatic circuit breaker | false |
| Bluetooth interface | false |
| Cable length measurement | false |
| Cable symmetry testing for two wire connections a-b-E | false |
| Calibration according to ISO/IEC 17025 | N/A |
| Calibration certificate according to DAkkS | N/A |
| Capacitance measurement | true |
| Clip factors for current sensor | N/A |
| Clip factors for current transformer | N/A |
| COFRAC certified | N/A |
| Continuity test | true |
| Current supply | Battery |
| Data hold | true |
| Degree of protection (IP) | N/A |
| Duty cycle measurements | false |
| Explosion-tested version | false |
| Frequency Max. | 0.0001GHz |
| Frequency measurement | true |
| Harmonics analysis/power quality | false |
| High voltage test for motor windings | false |
| Indication | Digital |
| Inductance measurement | false |
| Interface | false |
| IR interface | false |
| Isolation resistance measuring range | N/A |
| Lowest resolution temperature | N/A |
| Lowest resolution, AC current | 10 µA |
| Lowest resolution, AC voltage | 0.1 mV |
| Lowest resolution, AC/DC current | N/A |
| Lowest resolution, AC/DC voltage | N/A |
| Lowest resolution, capacitance | 0.001 µF |
| Lowest resolution, DC current | 10 µA |
| Lowest resolution, DC voltage | 0.1 mV |
| Lowest resolution, frequency | 0.01 Hz |
| Lowest resolution, resistance | 0.1 Ohm |
| Max. capacitance measuring range | 9999µF |
| Max. current measuring range with clip factor | N/A |
| Max. current measuring range, AC | 10A |
| Max. current measuring range, AC/DC | N/A |
| Max. current measuring range, DC | 10A |
| Max. frequency measuring range | 99.99kHz |
| Max. resistance measuring range | 50MOhm |
| Max. temperature measuring range | N/A |
| Max. value storage | true |
| Max. voltage measuring circuit category | 600V |
| Max. voltage measuring range AC | 1000V |
| Max. voltage measuring range AC/DC | N/A |
| Max. voltage measuring range DC | 1000V |
| Maximum Resistance | 50000000Ω |
| Measured value memory | false |
| Measurement principle | N/A |
| Measuring circuit category | CAT IV |
| Measuring range selection | Manual/automatic |
| Milliohm measurement with 4 wire technique (Kelvin connection) | false |
| Min. value storage | true |
| Multiple display | false |
| Nominal test voltage 10 V | false |
| Nominal test voltage 100 V | false |
| Nominal test voltage 1000 V | false |
| Nominal test voltage 250 V | false |
| Nominal test voltage 50 V | false |
| Nominal test voltage 500 V | false |
| Peak value memory | false |
| Power and energy measurement | false |
| Relative measurement accuracy | N/A |
| Relative value measurement | false |
| Resistance test/diode test | true |
| Rotational speed measuring | false |
| Scaling bar graph linear | true |
| Scaling bar graph logarithmic | false |
| Temperature measurement | false |
| Temperature measurement RTD | false |
| Temperature measurement TC | false |
| True RMS measurement | true |
| With conductivity measurement | false |
| With decibel measurement (dB) | false |
| With display backlight | false |
